Radio (mp3)

Interview with journalist Isabelle RUPIN, Mayenne Fidelity

Firstly, La maltière manufacture a light aluminum boat with flat-bottomed shell. Moreover, we do the cutting, assembly and shaping of each dinghy over all in our workshops. Further, we welded all our dinghy in aluminum.

To sum up, let us give you more detail of our aluminum boat:

Firstly, we are equipped the seals of our boats with high strength silicone. Secondly, each sheet of our tender boat is based is 2 mm thick with protective reinforcements. Thirdly, the lateral sides of all our dinghy are 1.5 mm with ribs. Fourthly, we have put a 2mm transom that is designed for strengthening the engine of our tender boat.

Fifthly, we have put a central box for all our aluminum boats that is a buoyancy reserve. Sixthly, and in exception, the dinghy 2700 does not have any drain plug. Last but not least, the charge of the la maltière boat is given for a draft of 10 cm.

Radio : Aluminum fishing boat

Moreover, at la maltère each boat is equipped with a trunk which has strong locks. In addition, the seats are covered with marine poly-wood and the pulleys and the cleats are made of aluminum for less weight.

Further, you can certainly see that a alveoli are present around our tender boat to hang noodles. Moreover, we made the boat oars of wood with brass socks.

As well as that, you can assuredly find that the boat rowlocks supports are in bronze. Similarly, and most importantly that we made the boat hinges of aluminum.

Moreover, you will find that all our boats have a drain plug and a reinforcement at the transom to fix a motor, for if the user of our tender boat wants to do so. However and in exception, the model 2700 does not have a drain plug.

Also, Aluminum boat, handcrafted.

Too, Subscribe now !

Similar Product : fishing boat

Nautical boating Accessories : tender boat – skiff boat – dinghy boat

Furthermore, La Maltière is a French artisanal factory of fishing boats and welded aluminum boats. In addition, each boat can be adapted to the customer’s request specially with a Nautical boating accessories from La Maltière. Besides, all our boats are flat-bottomed hulls.

Moreover, and most importantly, we manufacture entirely all our Nautical boating Accessories ourselves. Above all, we done The cutting, assembly and shaping of all our boating accessories in our workshops. For instance, we made the joints with silicone for high strength finishing. And we made each bottom plate on the boat with 2 mm thick with protective reinforcements. Likewise, we made he lateral sides with 1.5 mm with ribs. Similarly, we produced the 2 mm transom is designed for the engine reinforcement. In the same vein,we fabricated the central box with a reserve of buoyancy.